© 1990-2023 - All Rights Reserved - ECdesigns
https://www.ecdesigns.nl
/
14 19
UT96
The UT96 is an optional USB to Toslink converter that
can be used with the PowerDAC-SX.
It supports USB full-speed:
44.1kHz / 48kHz / 88.2kHz / 96kHz
Use standard USB cable to connect to PC/Host/Streamer.
UT192 (O ElectroTos output)
The UT192 is an optional high-speed USB to Toslink converter that
can be used with the PowerDAC-SX or other Toslink DACs.
It supports USB high-speed:
44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz
The UT192 is based on the XMOS processor.
Use high-speed USB cable to connect to PC/Host/Streamer.
The UT192 has both
optical
Toslink
ElectroTos
output.
We found that using highest sample rates some optical Toslink cables would not work.
Depending on the quality of the Toslink cable, optical reflections can prevent reliable (bit-perfect) output !
Therefore we also fitted the UT192 with an ElectroTos output.
ElectroTos (using standard S/PDIF output) uses an electrical cable with a LED on the other end.
This eliminates optical reflections but can still use standard Toslink input.
So the UT192 can also be used with other DACs that use Toslink.
A 1 mtr. ElectroTos cable ET100 is included with UT192.
An 2 mtr. ElectroTos cable ET200 option is also available in webshop.
An 4 mtr. ElectroTos cable ET400 option is also available in webshop.
