ECdesigns PowerDAC-SX, Руководство пользователя

Страница: 12 / 19

© 1990-2023 - All Rights Reserved - ECdesigns
https://www.ecdesigns.nl
/ 12 19
Alternate firmware update
If you don't want to register and download STM32CubeProgrammer then you can also use the dfu-util
command-line utility to download new firmware into the PowerDAC-SX.
For this you will have to use the command-line to update firmware.
Download dfu-util here: http://dfu-util.sourceforge.net/releases/dfu-util-0.11-binaries.tar.xz
After unpacking open shell/command window and change directory to “dfu-util-0.11-binaries“
Depending on your operating system change directory to the directory containing the dfu-util executable for
your operating system.
Disconnect the mains power cable from the PowerDAC-SX !
Us tweezers to set jumpers to PROGRAM configuration (see Jumper settings on page 9).
Now connect a USB cable from the PowerDAC-SX to your computer.
Now copy the firmware file (see page 10) e.g. PDRS140.bin into the same directory containing the dfu-util
executable.
From this directory execute: dfu-util -a 0 --dfuse-address 0x08000000 -D PDRS140.bin
If this completes without errors (File downloaded successfully) your firmware should be updated.
Disconnect the USB cable from PowerDAC-SX and set jumpers back to their original position.
Close the housing !
After power-up the new firmware is used.