ECD L20 Скачать руководство пользователя страница 4

 

General Introduction  

Thank  you  for  selecting  the  Model  L20  meter.  The  Model  L20  is  a 
precision tool that measures pH, mV, ORP or temperature—depending 
on  the  electrode  you  are  using.  A  built-in  microprocessor  stores, 
calculates  and  compensates  for  all  parameters  related  to  pH 
determinations  including  pH  electrode  temperature  characteristics, 
electrode slope deviations and buffer solutions. 

This meter has a waterproof IP54 case. The mechanical keys are highly 
reliable  with  tactile  and  audio  feedback.  This  meter  is  powered  by  (6) 
“AAA”  alkaline  batteries  or  with  a  UL  approved  AC  adapter  (Output 
9VDC). The meter also displays a “BAT” message when the batteries are 
in  need  of  replacement.  Re-calibration  is  not  required  when  power  is 
restored.  

The  front  of  the  meter  has  a  large  LCD  that  displays  pH  or  mV  and 
temperature  simultaneously  along  with  user  prompts  and  mode 
indicators.  The  unit  prompts  the  user  through  calibration  and 
measurement procedures.  

An AUTOLOCK feature for both pH and mV measurements enables the 
unit  to  automatically  sense  the  end  point  and  “LOCK”  the  display  to 
indicate  the  end  point  value  of  a  measurement.  AUTOLOCK  and  user 
prompts help eliminate most  errors in determining pH and mV  values, 
resulting in precise, repeatable and error-free measurements. The Model 
L20 can also be used in non-AUTOLOCK mode. 

The  Model  L20  is  available  with  pH,  ORP  and  ATC  (Automatic 
Temperature Compensation) probes. Other features include single, dual 
or three point calibration, electrode offset recognition, electrode slope 
recognition;  electrode  efficiency  display,  built-in  buffer  coefficients, 
automatic or manual temperature compensation, long battery life, and 
50/60Hz  AC  noise  rejection.  This  meter  is  user-friendly,  for  field, 
industrial and laboratory applications. 

 

 

Содержание L20





















Отзывы: