ECD L20 Скачать руководство пользователя страница 18

15 

 

Warranty 

Electro-Chemical Devices, Inc. (ECD) warrants all products it manufactures to be 
free from defect in materials and factory workmanship, and agrees to repair or 
replace any product that fails to perform, as specified, within one (1) year after 
date of shipment. This warranty shall not apply to any product that has been: 

1.  Subjected to misuse, negligence or accident; 
2.  Connected, installed, adjusted or otherwise used not in accordance with 

the instructions furnished by ECD; 

3.  Repaired, modified or altered by persons not authorized by ECD, resulting 

in injury to the performance, stability or reliability of the product. 

This warranty is in lieu of any other warranty, expressed or implied. ECD reserves 
the right to make changes in the design or construction of its products at any 
time, without  prior  notification, and without  incurring any obligation to make 
any changes in previously delivered products. 

Seller’s sole liabilities and the buyer’s sole remedies under this agreement shall 
be limited to a refund in the purchase price, or at ECD’s discretion, to the repair 
or  replacement  of  any  product  that  proves,  upon  ECD’s  examination,  to  be 
defective, when returned to the factory, transportation prepaid by the buyer, 
within one (1) year of the product’s original shipment date. Seller shall not be 
liable  for  damages  consequential  or  incidental  to  defects  in  any  product,  for 
failure of delivery in whole or in part, for injuries resulting from its use, or for any 
other cause. 

This warranty and the writing attached constitute the full understanding of seller 
and  the  buyer,  and  no  terms,  conditions,  understanding,  or  agreement 
purporting to modify or vary the terms hereof shall be binding unless hereafter 
made in writing and signed by an authorized official of Electro-Chemical Devices, 
Inc. 

This warranty does not cover pH, ORP or Specific Ion measurement, reference or 
combination electrodes or electrode cartridges that have been commissioned in 
service. 

If service or repair is required, please obtain the serial number(s) or sales order 
number of the product(s) in question and contact ECD’s Service Department at: 
+1-800-729-1333 (USA/Canada) or +1-714-695-0051. 

 

 

Содержание L20





















Отзывы: