ECA CONFEO PREMIX P Series, Руководство по эксплуатации и установке

Страница: 6 / 47

6
4- SAFETY RULES AND WARNINGS
4.1- Safety Instruc�ons
• When a gas leak is found or suspected;
• Turn off the gas valve of the boiler and the valves of all other devices opera�ng with gas.
• Shut off the stove, oven and similar appliances to put their flame out.
• Do not light matches, lighter etc, and stub out your cigare�e.
• Ven�late the environment by opening doors and windows.
• Do not ever touch the bu�ons and plugs of your electrical appliances.
• Turn off the gas valves in the apartment and building entrance.
• Do not use the phones at places where the gas leak is suspected.
• Call your qualified person as soon as possible.
• Do not place and use flammable and explosive liquid or materials around the boiler.
• Keep materials such as water, foam away from electrical connec�ons during opera�ons such as cleaning, gas leak
test etc.
• Do not lay the LPG container down
• Do not block air vents, openings made in the walls of the room which provide fresh air to the installa�on room.
4.2- Water Systems & Gas Supply Line
Before installa�on of the boiler, the water systems (CH & DHW circuit) and gas supply line must be completed in
accordance with the relevant regula�ons and standards by user.
4.3- Installa�on
• The boiler must be installed in accordance with na�onal and local requirements, gas safety regula�ons, relevant
standarts and this manual by qualified installer.
• The appliance should be mounted against a closed wall.
• The appliance should not be posi�oned having direct contact to steam, detergent or gases.
• Any change of flue posi�on must not be made without consul�ng qualified person.
• Sunlight can cause color change on the exterior of your device over �me.
• The device must be installed in indoor spaces under normal condi�ons. However, it can be operated in a suitable
cabinet in places such as garage, open balcony. Please consult E.C.A for proper cabine sizes.
• If device is located in an unheated area, it should be connected to mains, switched on, and pressure of installa�on
should be within opera�on range so that freeze protec�on is ac�vated. Even if device is OFF posi�on, freeze
protec�on stays ac�vated.
• Be careful due to the fact that the front panel is glass during the assembly of the device, pointed / piercing etc.
Care should be taken that objects do not hit the windshield panel.
4.4- Boiler Start Up
• If the user requests gas conversion a�er purchasing the device, this process is subject to a fee.
• Gas conversion should be done by an authorized service. Gas leakage test must be done a�er conversion. Boiler
start up must be performed certainly by qualified person.