EC POWER XRGI 20G-TO, Руководство пользователя

Страница: 78 / 168

78
Version 1.0 - 2012 Manual XrGi 20G-To
The control system optimises heat and power production based on the times entered.
Should the XRGI preferably be used to cover peak power loads at certain times of day, these times can be programmed here
as high tariff periods. Use the heat backup settings to select whether to use the XRGI outside peak loads or not.
Eingabe:
Use the keys to move the cursor to the time you want to change then press OK . The cursor now flashes on the hours
figure.
Use the
keys to change the hours and press OK . The cursor now moves to the minutes figure.
Use the keys to change the minutes and press OK to complete.
Use the ESC key to go back from minutes to hours.
Use the same procedure to change all times that need to be changed.
Move cursor to Save and press OK to save.
Changes will take effect a few seconds after they are entered. Settings can be changed at any time, even in automatic
operation.
The menu items are shown below:
4.1.9.2. Heat-controlled
Press OK to display load profile settings.
High load setting
Low load setting
Heat Controlled
Power production values
High load
Low load
25,5 kW
9,0 kW
OK
Cancel
Storage
Status
Info.
Service
Power
Production
Power
Consumption
Modem call
Heat & Tariff
Power Sales
Start/Stop
Heat Controlled
Technician