Chengdu Ebyte Electronic Technology Co., Ltd.
NE2-S1/NE2-S1-TB User Manual
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
9
3.2Technical Parameters
Item
Description
Operating Voltage
DC 3.1~6 V ( VCC1 )
If the power supply is 5.0V, the VCC pin must be used, and the
load capacity of the 5.0V power supply is recommended to be
above 300mA.
DC 3.0~3.6V (VCC2)
If the power supply is 3.3V, it is recommended to use the
VCC2 pin (it is not recommended to connect the VCC 1 pin)
and the load capacity of the 3.3V power supply is
recommended to be above 300mA.
Only one of the two power supply methods can be selected,
and remember not to supply power at the same time.
Working current
Peak value: 180mA@5V(VCC1); [email protected](VCC2)
Standby: 50mA@5V(VCC1); [email protected](VCC2)
encapsulation
1.27mm stamp hole
Operating mode
TCP Server (default), TCP Client, UDP Server, UDP Client, H
TTP Client, M QTT Client
Socket connection The single link placed by the TCP server supports 5 client
connections
Network protocol
TCP/UDP, M QTT , H TTP , IPv4, DHCP, DNS
IP acquisition
method
Static IP (default) , DHCP
DNS domain name
resolution
support
Domain name
resolution server
1 14.114.114.114 ( customizable )
Configuration
method
Web page, parameter configuration tool, AT command
IP address
192.168.3.7 (customizable)
username
admin (customizable)
password
admin (customizable)
local port
888 6 (customizable)
subnet mask
255.255.255.0 (customizable)
gateway
192.168.3.1 (customizable)
Serial buffer
10k Byte or 1024 packets
Packaging
mechanism
Maximum 1024 Byte , 1~80 bytes idle time
Serial port baud
rate
6 00 ~4608 00 bps (default 115200)