Chengdu Ebyte Electronic Technology Co., Ltd.
NE2-S1/NE2-S1-TB User Manual
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
6
（
2
）
In the "Network Settings" area, select the TCP client mode (TCP Client), the remote host
address corresponds (the device's default local IP: 192.168.3.7) , the remote host port corresponds to
the device's factory local port 888 6 , and click Connect.
（
3
）
Wait for the computer to connect to the serial port server. After the connection is
completed, the LINK light of the serial port server is always on.
（
4
）
Open the serial port assistant, set the serial port baud rate to 115200, and set the serial
port parameters to 1/8/None. Click to open the serial port.
（
5
）
Data transmission test, the serial port assistant (serial port side) sends test data, and the
