Chengdu Ebyte Electronic Technology Co.,Ltd.
E610-433TxxS User Manual
Copyright ©2012–2023
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
5
1. Overview
1.1 Introduction
E610-433TXXS product is a high speed continuous transmission type 433M wireless data transmission module
developed by YIBT, with built-in high performance microcontroller and wireless transceiver chip. It operates in the
410-441MHz frequency band (default 433MHz) and has a transmit power of 20-30dBm.
The main function is that the module can perform continuous and uninterrupted transmission at different serial port baud
rates when in continuous transmission mode, and the data output delay at the receiving end is low, which is suitable for
scenarios requiring fast transmission of large amounts of data, such as: high-speed sensing, mapping and measurement
control, remote sensing and positioning, etc.
1.2 Features
supports automatic relay networking in general mode, multi-level relaying for ultra-long distance communications,
and multiple networks running simultaneously in the same area.
supports user-set communication keys which cannot be read, greatly improving the confidentiality of user data.
supports RSSI signal strength indication function for assessing signal quality, improving communication networks
and ranging.
supports wireless parameter configuration, sending command packets wirelessly to remotely configure or read
wireless module parameters.
supports fixed-point transmission, broadcast transmission, channel monitoring.
supports deep hibernation, the power consumption of the whole unit in this mode is about 2uA.
supports the global license-free ISM 433 MHz band.
E610-433T30S module with built-in PA+LNA+SAW, communication distance up to 10km under ideal conditions.
E610-433T20S module with built-in LNA+SAW, communication distance up to 6km under ideal conditions.
parameters are saved at power down and the module will work according to the set parameters after power up again.
high efficiency watchdog design, in case of abnormality, the module will restart automatically and can continue to
work according to the previously set parameters.
