Ebyte E18-DTU Series, Руководство пользователя

Страница: 9 / 32

Chengdu Ebyte Electronic Technology Co., Ltd. E18-DTU Series User Manual
Copyright © 2012–20 23 , Chengdu Ebyte Electronic Technology Co., Ltd.
8
2.2 Product size
serial
number
name station status Function button action LED status
11 SMART
The coordinator did not
create the network
The coordinator creates the
network
short press LINK light flashes at 10Hz
The coordinator has
created the network
Coordinator Open Network short press LINK light flashes at 1Hz
The router/terminal is not
configured with a
network
Start to configure the
network
short press LINK light flashes at 10Hz
The router/terminal has
been configured with a
network
enter auto pairing mode short press RUN light flashes at 1Hz
The router/terminal has
been configured with a
network
Clear the network (exit the
current network)
Long press for 5
seconds
The RUN light is always on
The router/terminal is not
configured with a
network
Restore Factory Long press for 5
seconds
The RUN light is always on
any state
Serial port baud rate
recovery (115200bps)
Press button “SMART”
while the radio is
powered on , wait for 5
seconds, and release the
SMART button after the
RUN light is on.
RUN light: off→on→off
serial number name describe