Ebyte E104-BT10-IPX, Руководство пользователя

Страница: 12 / 30

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT10-IPX User Manual
Copyright ©2012–2019
，
C
hengdu Ebyte Electronic Technology Co., Ltd
4-11
Generic Level Server 1002
Generic Default Transition Time Server 1004
Generic Power OnOff Server 1006
Generic Power OnOff Setup Server 1007
Light Lightness Server 1300
Light Lightness Setup Server 1301
Light HSL Server 1307
Light HSL Setup Server 1308
VENDOR_MD_OSPF_S （ transparent transmission model
ID ）
00000211
Generic Level Server 1002
Main 1
Light HSL Hue Server 130A
Generic Level Server 1002
Main 2
Light HSL Saturation Server 130B
4.1.5 Address (unicast), Element(element)
An address corresponds to an element, and there are three elements, we can call it the element address, which is the
unique address assigned to the node by the provision device during the provisioning process. In the same mesh network,
each node device may have multiple addresses. However, a model in each device can only have one address, but different
models can be bound to one address in the subsequent mesh network communication process. The device is relying on
this address to find other devices.
E104_BT10G is for the Provision role.
E104_BT10N is for the node role
4.2 Specific instruction
4.2.1 Networking introduction
E104_BT10 includes E104_BT10G, E104_BT10N
，
E104_BT10G
（
provisioner
），
E104_BT10N
（
node
），
E104_BT10G is the initiator of the whole network and it is unique in the network.
Using E104_BT10G to put E104_BT10N into the netwokr of E104_BT10G. Both E104_BT10G and E104_BT10N
are necessary.
4.2.2 Node networking process and status indication
Environment
：
Serial debugging assistant
（
baud rate 115200
，
8N1
）
Hardware preparation
：
one E104_BT10G
，
one and more E104_BT10N.
Software setting
：
E104_BT10G need to set netkey
，
APPkey
（
see more from command 3.1.1
）
which need to be set. The