manualshive.com logo in svg

Ebyte E103-W01, Руководство пользователя, Страница: 9 / 29

Поделиться
Скачать
Ebyte E103-W01 Скачать руководство пользователя страница 9

Chengdu Ebyte Electronic Technology Co., Ltd.

                                                                                                                      E103-W01 User Manual                                                                                                                                                                     

 

Copyright ©2012–2018

 

Chengdu Ebyte Electronic Technology Co., Ltd. 

                                                                                                                                     

8 

 

to the wi-fi name as EBT_XXXXXX (XXXXXX is last three-byte for MAC address). 
If the MAC address for module is “1a:fe:34:ed:a6:68”

，

  then SSID is “EBT_EDA668”. 

No password for default. 

 

4 

【

STATION mode configuration

】：

 

Open  Wi-Fi  configuration  software,  select  port  number  in  the  left  corner,  then  the  serial  port  open 
automatically. 
Serial port status changes to open now, click “STATION” button to enter configuration interface. 
The test router name as Ebyte, password is e30e31e32. 
Click “enter Sta mode” to change the mode to STATION. 
Click “connect to router”, and wait a few seconds to see the interface shown in the figure below, which means 
module is connected to the router successfully. 
Then user can click “IP information query” to query IP information. 

Содержание E103-W01






























Отзывы:

Нет отзывов