manualshive.com logo in svg

Ebyte E103-W01, Руководство пользователя, Страница: 14 / 29

Поделиться
Скачать
Ebyte E103-W01 Скачать руководство пользователя страница 14

Chengdu Ebyte Electronic Technology Co., Ltd.

                                                                                                                      E103-W01 User Manual                                                                                                                                                                     

 

Copyright ©2012–2018

 

Chengdu Ebyte Electronic Technology Co., Ltd. 

                                                                                                                                     

13 

 

 

8 

【

Transparent transmission on power-up

】：

 

Advantage: save the complicated operation steps for user, once the configuration for transparent transmission 
on power-up is done, transparent transmission can be achieved on power-up. 
After using this function, user only need to configure the connection between router and TCP once. 
When module re-start or re-power, it will connect with router automatically, then connect with specified TCP 
server automatically. User only need to wait the completion of TCP connection (wi-fi indicator goes out), then 
transmit data directly. 
Click “transparent transmission on power-up” and input corresponding wi-fi name and password, then click 
“wi-fi”, see below interface means configuration is down. 

 

Input server IP address, port number, and choose TCP mode, then click “transparent transmission on power-
up”, see below interface means configuration is done. 

Содержание E103-W01






























Отзывы:

Нет отзывов