EBS EPX400, Инструкция по установке и программированию, Страница: 31 / 71

EPX400 – Manual Page 31 / 71
Backup Server Address
It is address of second (backup) receiver of monitoring system (OSM.Server) or
computer where “Communication Server” software has been installed , e.g.
89.130.125.82. This address may be provided in domain name of server, e.g.
monitor.gprs.com. In this case it is required to provide minimum one address of DNS
server.
Backup Server Port
It determines server port that was selected in backup server for collection of data
from transmitter.
APN
Parameter depending on GSM network operator that supplies GPRS (SMS) services.
It provides GSM network access point name.
It possible to obtain a private access point. In this case a name will be provided by
GSM network operator.
User ID
When using public APN, user ID is mostly not required. For private APN this
parameter shall be obtained from operator (it is impossible to be granted access to
GPRS network without it).
User password
When using public APN, user ID is mostly not required. For private APN this
parameter shall be obtained from operator (it is impossible to be granted access to
GPRS network without it).
Note: Private APN provides for higher system security.
DNS1 and DNS2
It determines address of main and backup DNS server (Domain Name System).
If IP server address has been entered in form of domain it is required to provide
minimum one DNS address.
8.1.2.3. SMS Parameters
Server Phone Number
If GSM modem is connected to server application (e.g. OSM.Server) enter in this field
its number. Any SMS will be sent to this number if transmitter has got problems with
GPRS transmission.
If this field is left blank or 0 was entered, the transmitter will not be operating in
SMS mode.