Ebode DVLHD22, Руководство пользователя

Страница: 8 / 28

7-6-2011 8 ebode DVLHD22
Note:
1. When the system is in active mode, press POWER key on the
remote control pointing to the Transmitter or on the top of
Transmitter, then both the Transmitter and the Receiver will enter
“Standby mode” (RF disconnected; LED lit in red) and Loop-through
display and the 2
nd
display will be off.
2. When the system is in active mode, press POWER key on the
REMOTE CONTROL UNIT pointing to Receiver or on the top of
Receiver, then the Transmitter will enter “Listen mode” (RF
disconnected; POWER LED lit in purple) and the 2
nd
display (the
display attached to the Receiver) will be off but Loop-through
display (the display attached to the Transmitter) will keep on.
3. The “Standby” mode consumes 90% less of the power. User has to
press power key on top cover of both Transmitter and Receiver to
resume to “Active mode”.
D.
On Screen Display (OSD) vs. Remote Controle Unit Instruction
X
Press the POWER button
(1) Press the power button on the REMOTE CONTROL UNIT to Transmitter or press the
power button on the top of Transmitter to enter “Standby mode” from “active mode”.
OSD Displayed:
█ HDMI1 CH10 WIDE Off 1280x1024
Standby Mode, Loop-thru Off
(2) Press the power button on the REMOTE CONTROL UNIT to Receiver or press the
power button on the top of Receiver to enter “Standby mode” from “active mode”.
OSD Displayed:
█ HDMI1 CH10 WIDE Off 1280x1024
Standby Mode, Loop-thru On
Y
Press the INFO button on the REMOTE CONTROL UNIT, and Signal Quality, Source,
Channel, WIDE mode status and resolution will be displayed for user reference.
OSD Displayed: