ebm-papst G1G170-AB05-20, Руководство по эксплуатации

Страница: 8 / 13

G1G170-AB05-20
4.3.2 Establish supply connections
CAUTION
Electrical voltage
Operating instructions
The device is a built-in component and features no electrically
isolating switch.
→ Connect the device to a suitable trigger device. Connect the
device only to circuits that can be switched off using an all-
pole disconnecting switch.
→ When working on the device, you must switch off the
system/machine in which the device is installed and secure
it from being switched on again.
;
Check the PIN assignment of your connector.
;
Connect the panel connector and mating connector.
;
Ensure that the connector is locked in correctly.
Item no.: 50103-5-9970 · Revision: 70943 · Print-out: 2012-04-11 · Y. Uhlmann (VM-TDO) · Page 8 / 12
ebm-papst Mulfingen GmbH & Co. KG · Bachm ь hle 2 · D-74673 Mulfingen · Phone +49 7938 81-0 · Fax +49 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
T
ranslation of
the
or
iginal oper
ating instr
uctions