G1G170-AB05-20
Operating instructions
You can control the blower either via the 0-10 VDC input or the
PWM input. Note: Inputs cannot be used simultaneously.
3.2 Nominal data
3.4 Mounting data
For depth of screw, see chapter 3.1 Graphic rendition of products
;
Secure the mounting screws against accidentally coming loose (e.g.
by using self-locking screws).
Motor
Phase
M1G074-CF
1~
Strength class for
mounting screws
8.8
Nominal voltage in VAC
115
Frequency in Hz
50/60
Type of data definition
fa
You can obtain additional mounting data from the product drawing if
necessary.
3.5 Transport and storage conditions
Speed in min
-1
Power input in W
Current draw in A
Min. ambient
temperature in °C
Max. ambient
temperature in °C
Min. temp. of flow
medium in °C
Max. temp. of flow
medium in °C
5730
345
4.0
- 25
+ 55
-25
+80
;
Use the device in accordance with its protection type.
Max. permissible
+80
°C
ambient motor temp.
(transp./ storage)
Min. permissible
-40 °C
ambient motor temp.
(transp./storage)
3.6 Electromagnetic compatibility
EMC interference
Acc. to EN 61000-6-2
ml = max. load · me = max. efficiency · fa = running at free air
cs = customer specs · cu = customer unit
Subject to alterations
3.3 Technical description
Mass
4.35
kg
Size
170
mm
Surface of rotor
Coated in black
Material of protective
Polyflam RPP 374-ND CS1 (UL 97-V0)
cover
Material of impeller
Aluminium sheet
Housing material
Die-cast
aluminium
Direction of rotation
Clockwise, seen on rotor
Type of protection
IP
20
Insulation class
"B"
Mounting position
Any
Cooling bore / aperture
Rotor-side
Premix
If gas is premixed in the blower, a
special blower must be used.
Motor bearing
Ball bearing
Technical features
- Control input PWM
- Motor current limit
- Tach output
- Overtemperature-protected motor
Leakage current
<= 3.5 mA
Electrical leads
With plug
Motor protection
Thermal overload protector (TOP) wired
internally
Approval
UL 507; CSA C22.2 Nr.113
For cyclic speed loads, note that the rotating parts of the device
are designed for maximum one million load cycles. If you have
specific questions, contact ebm-papst for support.
immunity
EMC interference
emission
Acc. to EN 61000-6-3 (household
environment)
Item no.: 50103-5-9970 · Revision: 70943 · Print-out: 2012-04-11 · Y. Uhlmann (VM-TDO) · Page 6 / 12
ebm-papst Mulfingen GmbH & Co. KG · Bachm
ь
hle 2 · D-74673 Mulfingen · Phone +49 7938 81-0 · Fax +49 7938 81-110 · [email protected] · www.ebmpapst.com
T
ranslation of
the
or
iginal oper
ating instr
uctions
