EBLOCKER PRO, Руководство пользователя, Страница: 9 / 95

28.08.2018 Page 9 of 95
2 Commissioning
By following this user manual, you will be able to set up your eBlocker in no time.
Please follow the steps to put your device in operation.
Starting from serial number 11000 the eBlocker has an LED installed. The LED is located in the back
of the casing and signals the condition of your eBlocker.

The LED lights up blue when the eBlocker is connected to the power supply and its system
starts running.

The LED lights up orange when the eBlocker has automatically configured itself after about
5 minutes. The interface can be reached via the website http://setup.eblocker.com.
In only three steps your eBlocker is ready for use:
1. Connection
First , connect your eBlocker to your router or switch, with the orange LAN cable .
Then connect your eBlocker with the adapter cable and the power supply.
Automatic configuration
Wait for 5 minutes until your eBlocker has automatically configure itself.
Start an Internet browser and go to: http://setup.eblocker.com
Start
The eBlocker icon appears at the top right of your browser. With a click on the icon, you will be lead to
the so called
“controlbar”, in which you can view the most important information about the page you are
currently visiting. You are able to customize the eBlocker settings here.
The network link leads you to the network setup wizard. If the icon does not appear, you can find help
in section
0 .