
28.08.2018
Page 87 of 95
Automatic network mode
In this mode your router assigns the IP addresses in your network with its DHCP service. The eBlocker
is compatible with most routers, but there are a few routers that can't work with the eBlocker like this.
Individual Settings
In this mode the eBlocker assigns the IP addresses in the network. To do this, the DHCP service of the
router must be switched off. The eBlocker then takes over the tasks of the DHCP service in your
network. Almost all routers are compatible with eBlocker in this mode. You will be accompanied through
the setup of the "individual settings" by an assistant, which will give you step-by-step assistance.
Expert mode
In this mode, experienced users can edit the network settings of the eBlocker. These settings make
sense, for example, if you operate your own DHCP server in your network.
8.10 eBlocker Mobile
eBlocker Mobile is based on OpenVPN. Your eBlocker becomes a VPN server to which you can
connect from a mobile device. Once connected to the eBlocker via OpenVPN, you surf mobile with
exactly the same protection you're used to at home. This requires the installation of an OpenVPN
client for your mobile device and the installation of the corresponding eBlocker VPN configuration file.
As soon as you activate the eBlocker Mobile feature, an assistant will help you setting up the mobile
feature. You need an App for your operating system, that opens a VPN Tunnel to your home network.
Download and install a free OpenVPN app, get the config file from your eBlocker dashboard and
establish the connection:
Содержание PRO
Страница 32: ...28 08 2018 Page 32 of 95...