EBLOCKER PRO, Руководство пользователя, Страница: 68 / 95

28.08.2018 Page 68 of 95
For example, if you do not want the eBlocker to monitor the SSL connections to your bank's Internet
portal, create a corresponding entry in the SSL exception list.
Select a unique name (e.g. "Sparkasse Hamburg"), enter the URL of the banking portal and complete
the process by pressing the orange button marked "Add Domain".
Directly below the input fields you will see an exception list that has already been prepared by us. If
you do not agree with one of the exempted domains, you can easily remove it by clicking on the
orange trash can on the right side. Once the domain has been removed from the exception list, the
eBlocker will automatically monitor calls to this site again, even if the connections are encrypted with
SSL.
Important: In this exception list you also see the domains of the exception lists of the trusted apps. You
cannot delete them here.
8.4.4 HTTPS
– Manual Recording
"Manual Recording" is for tech savvy users only. It is used for defining domain exceptions where
eBlocker should be deactivated. If an app is not compatible with eBlocker-HTTPS (see also section
5.6), the HTTPS
connection requests from a device can be recorded. Afterwards eBlocker’s behavior
for this connection type can be defined, tested and saved as an app definition. Proceed as follows:
First analyze the HTTPS/SSL-connections that runs directly from the app. Then you can set rules how
your eBlocker should deal with these connections (activate eBlocker for connections or deactivate your
eBlocker for connections). Choose the device on which you are using the app, as well as the duration
of the recording, the maximum size of the recording file and start recording afterwards.
Use the app as usual. Especially test the functions that seem to not be compatible with your eBlocker.
Update the list with the recorded connections afterwards.
To find the domains and IP addresses your eBlocker should not be active on, it is necessary to try out
different settings. Use the switch slide ("Test tem
porary rule set“), so the selected rules can be effective
temporarily and test the functionalities again.
Please note that the proposed rules may not always be correct, because of some connections that are
recorded that do not source from the tested app.
As soon as the app runs smoothly with temporary rules, you can save these rules as a new app
definition for good.