QUBO
EN
29
www.eberg.eu
It is possible to connect the discharge pipe to the window
seal -
EBERG Climalock
(available separately) as shown in
the picture.
WINDOW KIT INSTALL
TROUBLE SHOOTING
Problem
Cause
Trouble shooting
E1
Electrical short on both temperatu-
re sensor and PCB
Contact an electrician for repair
E2
Electrical short of temperature sen-
sor copper tube and PCB wiring
Contact an electrician for repair
E4
Indicates water tank full
User needs to pull out the rubber
stopper which is located at the
bottom of the unit, to drain the
water away.
DH
Defrost mode
The procedure is fully normal
and protects the system against
freezing and malfunctions. After
about 15 minutes, the device
will automatically turn on again
(depending on the programmed
function). This procedure
automatically repeats itself
regularly.