QUBO
EN
23
www.eberg.eu
CONTROL PANEL & DESCRIPTION OF FUNCTION
1. POWER BUTTON
Press to turn unit „ON” or „OFF”.
2. FUNCTION
Press this button to select cooling, heating, or dehumidifying.
3. TEMPERATURE REGULATION BUTTON (UP)
In cooling mode:
This button raises the preset temperature by 1ºC each time it is pressed and
the maximum limit is 30ºC.
In heating mode:
This button raises the preset temperature by 1ºC each time it is pressed
and the maximum limit is 25ºC.
4. TEMPERATURE REGULATION BUTTON (DOWN)
During cooling mode:
This key lowers the preset temperature by 1ºC each time it is pressed
and the minimum limit is 17ºC.
During heating mode:
This key lowers the preset temperature by 1ºC each time it is pressed
and the minimum limit is 15ºC.
5. LED DISPLAY
The display indicates the current temperature setting or the timer setting. When the set
temperature or the timer is adjusted, the new setting is shown then the display returns the
current set temperature. The display is also used to displayerror codes.
Note:
In heating function and dehumidifying function, this key is invalid because the unit is
defined to be high speed in heating mode and low speed in dehumidifying mode.
6. SPEED
Press to select either LOW, MEDIUM, HIGH or AUTO fan speed.
If AUTO is selected (in cooling mode) ,HIGH or MEDIUM or LOW will be selected automatically
according to the difference between temperature setting and ambient temperature.
7. TIMER
Programmable timer ON/OFF button.
TIMER-ON:
The timer-on is used to turn on the unit automatically after the set time is over.
1. Press the „TIMER” button in stand-by mode to set the time you desired.
2. Once the set time has elapsed, the unit will turn on automatically.
3. If you press the „POWER” button before time has elapsed, the timer setting will be canceled
and the unit will turn on.
4. You can set the mode and fan speed while setting the timer.
TIMER-OFF:
The timer-off is used to turn off the unit automatically after the setting time is
over.