Eberg ERI 425 WiFi, Руководство пользователя

Страница: 21 / 26

ERI EN
21 www.eberg.eu
8. CONTROL SYSTEM DESCRIPTION
Control Panel:
A. Main switch
B. Temperature sensor
C. Display
D. Up/down key
E. ON/OFF switch
F. Timer and Wi-Fi button
G. Blue Wi-Fi light
H. Red timer light
Remote Controller:
+: Temp./Timer Up key
–: Temp./Timer Down key
: Temperature setting button
: Timer setting button
: Power button
9. TROUBLE SHOOTING
If the device does not turn on, follow the instruction below:
Check that the heating panel is connected and the electrical outlet is working properly.
Check the fuse of the builing’s/flat’s electrical network.
If the device still doea not work properly, contact an authorized service center to check and, if necessary,
repair the device.
ATTENTION! IF A PROBLEM OCCURS WITH THE DEVICE, UNDER NO CIRCUMSTANCES SHOULD YOU
DISMANTLE THE DEVICE OR ATTEMPT TO REPAIR YOURSELF. SUCH ACTIONS WILL VOID YOUR WARRANTY
AND MAY RESULT IN FIRE, ELECTRIC SHOCK, INJURY OR PROPERTY INJURY. IN THE EVENT OF MALFUNCTION
OF THE DEVICE, CONTACT AN AUTHORIZED SERVICE CENTER OR DISTRIBUTOR.
10. CLEANING AND STORAGE
Before cleaning your heater, switch off the heater and allow it to cool. Disconnect the power supply to the
appliance. The outside can be cleaned by wiping it over with a soft damp cloth and then the heater should
be dried. Do not use abrasive cleaning powders or furniture polish, as this can damage the surface finish.
To release the heater from the wall, for cleaning or redecoration, just open the screw bolt cap and unscrew
the bolts to take it off from the wall.
For short term storage, just unplug the heater and leave it; for long term storage, you can dismantle from
the wall or cover it with some material.