Eberg ERI 425 WiFi, Руководство пользователя

Страница: 15 / 26

ERI EN
15 www.eberg.eu
5. Screw the four fasten bolts into the plastic rails
fitting.
6. Put the caps onto the fasten bolts. It is
recommended to use some normal glue to stick
the caps onto the bolts steadily.
To remove the unit from the wall, just open the bolt caps and unscrew the bolts with a screw driver and
then take the heater down.
3. FREE STANDING INSTRUCTIONS
1. Put the free standing feet onto ground, keep the
slots of both foot collinear. Distance as 5-7cm from
either side to the relevant foot is recommended;
then insert the panel into the slots lightly.
2. Screw the two bolts into the holes on the feet.