BRIS
EN
14
www.eberg.eu
Usage
• POWER ON
• ON/OFF
• SPEED
• COOL/HUMIDITY
• MODE
Automatic shutdown function: After 15 hours will automatically shut down without any opera-
tion.
After the power is turned on, the buzzer will sound (165ms) and the power icon on the LCD
panel will not light up.
After power on, press this key to start the fan for the first time. The fan starts in stroke mode to
increase the starting torque. After 3 seconds, it returns to the weak wind state. Press this key
again to turn off all functions. In addition to the cooling function and automatic up and down
swing function, other functions have memory function and power off memory function.
Press this button to adjust the required Air Cooler speed to Low, Mid or High Speed.
Press the button for 3 seconds, LCD display close, then press any button to open the LCD
display.
Press this button to activate the Cooling/humidity function. Corresponding LCD display indica-
tor light will be on. Press this button again to turn off the Cooling/humidity function, corre-
sponding LCD display indicator light will be off. (Automatically switch to low-speed wind speed
in 2 minutes before the start of cooling, and resume the function before the last start of cooling
after 2 minutes)
If the water-short is detected within 10 seconds, the alarm will be turned off automatically, and
the system will automatically turn off the cooling function.
After the power on and in the working state. Press this button for the first time, the sleep wind
function is activated, the sleep wind indicator light will be on, press this button again to turn
on the Natural wind, the natural wind indicator light will be on. (sleep wind -> natural wind ->
Close)
