BRIS
EN
11
www.eberg.eu
Important Safety Instructions
Usage Cautions
• This fan is designed for a 220-240V/50-60Hz AC electric supply.
• Before cleaning or moving the fan,make sure it is unplugged. When unplugging, grip the
rubber part of the plug and do not pull the lead wire.
• Do not pull the plug with wet hand to avoid electrical shock.
• Do not damage,excessively bend,stretch,intertwine,press the electrical cord. Do not replace
electrical cord yourself. If the electric cable is damaged, it must be replaced by qualified person
in order to avoid a danger.
• Do not put any foreign body in the inlet or outlet. That will cause dangers or lower the power
of the wind.
• Avoid water dripping and being close to fire. Avoid any inhale of inflammable or explosive
objects.
• Do not spray pesticide or detergent to the fan to avoid any damage to the rubber finish.
• When fan not in use for a long time,please turn off all the switch and unplug the fan.
• Do not try to repair the fan yourself. It mus be done by qualified person.
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision
• The appliance must be disconnected from the supply mains before cleaning or other
maintenance.
• It is prohibited to cancel the use of water curtains.
• Ensure the fan is placed on stable and level position. Tilted or tipped over usage is prohibited.
• Disconnect the power cord before removing the appliance. Please pick up the handle located
on the rear guard of the fan to remove the product.
• Do not use the fan in high humidity environment or dusty places.
• Keep electrical appliances out of reach from children or infirm persons. Do not let them use the
appliances without supervision.
• Make sure that the water in the tank is not lower than the lowest mark, otherwise the cooling
function cannot be operated.
• Never insert fingers, pencils or any other objects through the guards when the power plug is
connected.
