Note:
All run menus will have two speeds listed. The leftmost speed
will be displayed inside parenthesis. This is the target speed
controlled by the user. The shaker will attempt to match this speed
and should do so within ten seconds after making an adjustment.
The rightmost speed is the tachometer reading, which shows the user
what the shaker is actually running at. The tachometer reading will
not necessarily match the target speed at all times, but is guaranteed
to be /- 5 RPM when calibrated correctly. Tachometer will
need to be recalibrated after belt changes or excessive belt wear.
See following page for Calibration information.
Note:
Reciprocating shakers will display OSC (oscillations) instead
of RPM (revolutions per minute).
Note:
Use slowest speed necessary to produce required shaking
action.
