![background image](http://html.mh-extra.com/html/rca/drc99310u/drc99310u_user-manual_334778001.webp)
WARNING:
Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified
technician.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED MAy RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
DANGER OF EXPLOSION IF BATTERy IS INCORRECTLy REPLACED. REPLACE ONLy WITH THE
SAME OR EQUIVALENT TyPE.
On Placement
• Do not use the unit in places that are extremely hot, cold, dusty or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a
cloth, or by placing it on carpeting.
• To avoid magnetizing, do not place the unit near speakers or magnets.
• Do not use this unit in direct sunlight or leave the unit in a closed automobile (or similar
environments) where it would be exposed to high temperatures above 104°F (40°C).
• No naked flame sources such as lighted candles should be placed on the AC power adapter or the
main unit.
• The AC/DC adaptor and apparatus should not be exposed to splashing or dripping liquids, and no
objects filled with liquids, such as vases, should be placed on the AC/DC adaptor and apparatus.
• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, should be placed on apparatus.
On Safety
• When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself.
Pulling the cord may damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power adapter.
On Condensation
• When left in a heated room where it is warm and damp, water droplets or condensation may form
inside the unit. When there is condensation inside the unit, the unit may not function normally. Let
the unit stand for 1 to 2 hours before turning the power on, or gradually heat the room and allow
the unit to dry before use.
Ventilation Warning
• Do not block the ventilation openings or holes. If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.
• Do not operate the unit in a confined space, such as a bookcase or built-in cabinet. Allow about 4
inches (10cm) of free space all around the unit for adequate ventilation.
Rating Plate Location
• The rating plate is located on the bottom of unit.
FCC Statements
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
To DC IN 9V - 12V Jack
2
Car power adapter
To cigarette
lighter socket
1
AC power adapter
2
1
To DC IN 9V - 12V Jack
To wall outlet
B. Using the Car Power Adapter
The 12V car power adapter
allows the unit to be used
with vehicles that have a 12V,
negative ground electrical
system.
A. Using the AC Power Adapter
Caution:
• The AC power adapter included with this unit is for its use only. Do not use it with other equipment.
• When the unit is not going to be used for long time, disconnect the AC power adapter from the wall
outlet.
• When the AC power adapter is plugged in, the apparatus is not completely disconnected from the
main power supply, even when the power is turned off.
Warning:
The AC/DC adaptor is used as disconnect device. The AC/DC adaptor of apparatus should not be
obstructed OR should be easily accessed during intended used. To be completely disconnect the power
input, the AC/DC adaptor of apparatus shall be disconnected from the mains.
Power Supply
The supplied AC power adapter
operates on AC 100-120V.
Caution:
• Use the provided 12V car power adapter only. Use with other car power adapters could damage the
unit.
• The 12V car power adapter included with this unit is for its use only. Do not use it with other
equipment.
• In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.
• Make sure the unit is securely fastened to prevent it from falling or flying through the air in the event
of an accident.
• When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may
become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.
• After use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.
C. Using the Built-in Battery
The unit has a built-in, non-replaceable, rechargeable battery. Charge the built-in battery before using it
for the first time. Complete charging typically takes approximately 4-5 hours. The charging light will go
out when the built-in battery becomes fully charged.
Warning:
• The built-in battery can only be recharged when the unit is in CHARGE mode while using the AC
power adapter.
• The built-in battery cannot be recharged when the unit is in ON mode.
• Do NOT recharge the built-in battery in a vehicle using the car power adapter.
• Batteries should not be exposed to excessive heat such as sunshine, fire or the like.
Note:
• When the built-in battery power is low, "Battery Low" will display on the screen and the unit will stop
playing.
• Recharge the built-in battery when you are ready to use it again.
• While using the built-in battery, the environmental temperature should be 41°F (5°C) to 95°F (35°C).
• To get the longest service life of the built-in battery, charge at indoor-temperature.
• The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do not
disassemble, heat above 212
o
F (100
o
C), or incinerate.
• The unit should not be exposed to excessive heat such as sunshine, fire or the like.
• When discarding the unit, environmental problems must be considered and local rules or laws
governing the disposal of such products must be strictly followed.
To recharge the built-in battery
1
To AC power
outlet
2
To DC IN 9V
- 12V Jack
3
Slide the switch
to CHARGE
4
Charging
light ON
5
Recharging
is completed
when charging
light goes out
AC power
adapter
B. Using Headphones/Earphones
• Turn down the volume before connecting, and then adjust the level.
• When headphones/earphones are connected, no sound will be emitted from the unit's speaker.
Headphones /Earphones
(3.5mm diameter plug) (not included)
Caution:
Avoid listening to sound at levels which may be harmful to your ears.
C. Connecting a USB Flash Drive
You can connect a USB flash drive (not included) to the USB port on the unit to play DivX® movies as
well as music and picture files.
• Plug the USB flash drive to the USB port on the unit.
• Pressing
STOP
button while player is not playing content will cause the player to switch between
DVD, USB, and SD Card modes. Repeatedly press
STOP
to select the mode you desire.
For operation of file playback on the USB flash drive, please refer to the section “PLAYING DivX® VIDEO
OR PICTURE FILES”.
Note:
• It is recommended USB flash drive is plugged when the unit is in STANDBY mode.
• It does not support USB hard disk mass storage device, multi-card reader and other USB computer
peripheral.
• It only supports USB flash drive (FAT32/16 max. capacity 32G bytes max, video bitrate is 7Mbps).
• Make sure your USB flash drive or SD card is FAT16/FAT32 file system. All other file system will not be
supported.
D. Using a SD Card Slot
you can connect a Secure Digital (SD) card (not included) to the SD card slot on the unit to play DivX
movies as well as sound & picture files.
• Plug the SD card fully into the memory expansion card slot on the unit until it clicks.
• Pressing
STOP
button while player is not playing content will cause the player to switch between
DVD, USB, and SD Card modes. Repeatedly press
STOP
to select the mode you desire.
Warning:
• It is recommended the SD card is plugged when the unit is in STANDBY mode.
• If the SD card is oriented incorrectly, it will not go fully into the slot. Do not apply force when
inserting the SD card.
• To remove the SD card, push the SD card into the slot and then slowly remove your finger, the lock
is released and the SD card is pushed out.
• Make sure to use correct Audio/Video cable, wrong plug connection may cause weak signal.
• If you have a stereo VCR, make sure you set it in stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a
videotape, the resulting copy will be unclear, with poor sound quality. This is NOT caused by a
defective DVD system.
A.2 Connecting a TV using analog output (good option)
If your TV has audio/video inputs, you can connect the unit to your TV using standard Audio/Video
cables.
To AUDIO /
VIDEO OUT
jacks
Audio / Video cable
(not included)
White Red Yellow
TV
W
hit
e Red
Yello
w
Watching a DVD on your TV
1. Turn on the unit.
2. Turn on the TV and follow the instructions included with it to watch video from external sources.
Connections
A.1 Connecting a TV using HDMI output (best option)
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital
connection for use with DVD players, set-top boxes and other digital AV devices.
For TVs that support it, HDMI can provide the best quality audio and video output (depending on media
source), and so is the preferred connection type. A HDMI cable (not included) incorporates both audio
and video signals, so you will have just one cable running from the unit to your TV. Using an HDMI
cable (not included), connect the HDMI OUT jack on your unit to the HDMI IN jack on your TV or HDMI-
compatible display.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI licensing LLC.
DRC99310U
user
manual
Read these instructions before using your new product for the first time.
AVC Multimedia,
Markham, Ontario L3R 1E3
http: //www.RCAav.com
Safety Precautions
* SEE BOTTOM OF UNIT FOR
GRAPHIC SYMBOLS *
The lightning flash with an arrowhead symbol,
within the equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be
of sufficient magnitude to cause an electric shock.
The exclamation point within the equilateral
triangle is intended to alert the user to the presence
of important operating and maintenance (servicing)
instructions in this owner’s manual.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
This product contains a
low power laser device.
Control Reference Guide
Battery Replacement
When the battery becomes weak, the operating distance of the remote control will be greatly reduced and
you will need to replace the battery.
Note:
If the remote control is not going to be used for a long time, remove the battery.
WARNING:
Do not dispose of the battery in a fire or it may leak and/or explode.
WARNING:
Batteries should not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
2. Insert one CR2025 (3V) size battery.
To Change Remote Battery
1. Open the battery door.
Using the Remote Control
• Point the remote control at the REMOTE SENSOR located
on the unit.
• When using this unit in very bright light, the infrared
REMOTE SENSOR may not work properly.
Remote Control
Remote Control
1.
VIDEO MODE
button
Adjust Brightness, Contrast and
Aspect Ratio of the LCD screen.
2.
PREV
button
Move back through titles,
chapters or tracks on a disc.
3.
/
SEARCH
buttons
SEARCH
:
Fast reverse playback.
SEARCH
:
Fast forward playback.
4.
GOTO
button
Skip directly to a location on
a CD/DVD.
5. Cursor ( , , , ) buttons
Move between selections on a menu screen
and adjust certain settings.
ENTER
button
Confirm selections on a menu screen.
6.
MEMORY
button
Set titles/chapters/tracks in a favorite order.
7. Number (
0
-
9
) buttons
Use when creating programs or locating a
title/chapter/track or specific time.
8.
REPEAT A-B
button
Perform point-to-point repeat playback on a
DVD or CD.
REPEAT DISC
button
Repeat a DVD chapter or title.
Repeat a CD track or the whole disc.
12.
DISPLAY
button
Show status information on the screen.
13.
ANGLE
button
Switch between multiple camera angles if
applicable to the DVD.
14.
AUDIO
button
Select one of the audio sound tracks on a
DVD (if more than one is available) or select
the audio output mode on a CD.
15.
SUBTITLE
button
Select one of the subtitle languages
programmed on a DVD (if available).
RETURN
button
Return to normal operation after using the
SETUP menu of a DVD.
SUBTITLE/
RETURN
M
6
5
4
9
8
0
7
3
2
ENTER
MEMORY
DISPLAY
AUDIO
MENU
PREV
SEARCH
GOTO
VIDEO
MODE
NEXT
STOP
PAUSE
PLAY
ANGLE
SETUP
A-B
DISC
REPEAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
HDMI Cable
(not included)
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted
material without permission.
Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for
limited viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is prohibited.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block the ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of a polarized or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the AC power cord or plug is damaged, liquid has spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Important Safety Instructions
The unit can play back
Region Management Information
Region Management Information: This unit is designed and manufactured to respond to the Region
Management Information that is encoded on DVDs. If the region number printed on the DVD does not
correspond to the region number of this unit, it cannot play that disc.
The region number of this unit is 1.
Note on Unauthorized Discs
you may not be able to play some DVDs on this unit, particularly if they were purchased from outside your
geographic area or made for business purposes.
DVDs
[8cm/12cm disc]
Compatible
Audio CDs
[8cm/12cm disc]
Disc Function or Operation That is Not Available
When the symbol appears on the screen, it indicates the function or operation attempted is not
available at that time. This occurs because the DVD manufacturer determines the specific functions of
DVDs. Certain functions may not be available on some DVDs. Be sure to read the documentation provided
with the DVD.
Icons Used on DVDs
Sample lcons
Note:
When playing back a CD-G (Graphics) or CD EXTRA disc,
the audio portion will be played, but the graphic images
will not be shown.
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
1
Titles, Chapters and Tracks
• DVDs are divided into
“titles”
and
“chapters”
. If the disc
has more than one movie on it, each movie would be a
separate
“title”
.
“Chapters”
are sections of titles.
• Audio CDs are divided into
“tracks”
. A
“track”
is usually
one song on an Audio CD.
Note:
Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded
on them, but some do not.
Disc Formats
Chapter1
Title1
Title2
Chapter2
Chapter3
Chapter1
Chapter2
Track1
Track2
Track3
Track4
Track5
Accessories
Please check and identify the supplied accessories.
Remote Control (with battery)..................................................................................................................................x 1
AC Power Adapter......................................................................................................................................................... x 1
Car Power Adapter........................................................................................................................................................ x 1
Headphone Splitter ...................................................................................................................................................... x 1
E - 1
E - 2
E - 3
E - 4
E - 5
1. LCD screen
2. HDMI jack
3.
DC IN 9V - 12V
jack
4.
AUDIO / VIDEO OUT
jack
5.
CHARGE / STANDBY / ON
switch
6.
VOLUME
control
Adjusts the volume.
7. Headphone jack
8.
STOP
button
Press to stop playing a disc.
MENU
button
Accesses DVD Disc Menu if DVD disc is
currently playing.
Accesses Setup menu if disc is not playing.
button
Press to start or resume playback of a disc.
Pressing during playback of a disc will cause
playback to be paused.
PREV
button
Press to go back to the previous title/ chapter
/ track.
Unit
In DVD Menu or Setup Menu, press to scroll
left.
SEARCH
button
Press to scroll up, press to perform fast
forward playback during CD playback.
In DVD Menu, Setup Menu or JPG Menu,
press to scroll up.
NEXT
button
Press to advance titles / chapters / tracks.
In DVD Menu or Setup Menu, press to scroll
right.
SEARCH
button
Press to scroll down, press to perform fast
reverse playback during CD playback.
In DVD Menu, Setup Menu or JPG Menu, press
to scroll down.
9. Disc Door
Push to close the disc door.
10.
OPEN
knob
Press the open knob to open the disc door.
11.USB Connector port
12.SD Card Slot
13.Remote sensor
Senses the remote control's signals.
14.
ON
indicator
15.
CHARGING
indicator
Charge the rechargeable battery before
using it for the first time. Complete charging
typically takes approximately 4-5 hours. The
charging light will go out when the battery
becomes fully charged.
Warning:
Disconnec t the car power
adapter when not in use. Not
for use in 24V vehicles.
Turning on the Unit
1. Slide the
CHARGE / STANDBY / ON
switch on the left side of the unit to the
ON position.
2. The start-up picture will appear on the screen.
3. After use, slide the
CHARGE / STANDBY / ON
switch to the STANDBy (power
off) position.
Remove the
PLASTIC sheet
before USING the
Remote Control.
SETUP
button
In Stop Mode, press to display
the unit’s SETUP menu.
9.
MENU
button
Enter and exit the main DVD
Menu.
10.
NEXT
button
Skip to next title, chapter or
track on a disc.
11.
STOP
button
Stop playing a disc.
PLAY
button
Start or resume playback of a
disc.
PAUSE
button
Press once to pause playback.
Press subsequently to advance
frame by frame on a DVD.
TV
Headphone Splitter(included)
Portable Cart Warning