Ebac VA32, Руководство пользователя, Страница: 16 / 32

RH
ppm
RH
Outdoor
Smart
Indoor
Boost
5.2°C
70%
21.9°C
60%
1000
13
Commissioning & Setup
3.0
3.1 Unit Commissioning
Once the unit and satellite screen are fully installed, the unit
can be powered up. Tap the
“Menu”
icon located in the top
left corner to navigate to the Menu page
Note
The screen goes into a standby mode after 2 minutes.
To awaken the screen, tap the touch screen
Tap the
“Commissioning/ Setup”
icon.
A password prompt will appear.
See below passcode for access
Password: 5213
See
“Figure 1”
and
“Figure 2”
for reference on how to setup
the unit to measure these values.
Inputting these measurements allows the unit to correlate the
fan speed with flow rate. This is required for SMART mode
Also inputting these measurements allows the unit to run
optimally for the installation which is likely to be bespoke.
It will accommodate duct length and resistances,
filter variation and leakages.
Tap each box & input the required information
Note
See section “2.6 Port Allocation” for further information
in regards to what these functions are.
If these are not installed, the box should remain blank.
1
2
4
3
MENU
Commissioning/ Setup
Silent Hours
Summer Boost
Service
FAN FLOW RATE SETUP
m ³ /h m ³ /h
Extract Supply
200
MAX MAX
SETUP
Time
(hh:mm)
(dd:mm:yy)
Date
31:01:22
Port Allocation (SW1)
Port Allocation (SW2)
SMART
16:00
Purge