8
If your Powerdri fails to operate
Always check the following list before requesting a repair service. Should a service call be
requested and the fault is found to be detailed below, a charge may be incurred.
Power indicator light is not illuminated
The unit is switched on at the mains. If necessary test the socket by plugging in another appliance.
Check the fuse in the plug and if necessary replace with another 13 amp fuse. If you continue to
have problems please see 'Requesting Service'.
1
2
Power indicator light is illuminated, but the unit is not collecting water
Version 1 - The humidistat (if activated) may be set too low, increase the setting. Version 2 - If the
indicator light is green the unit has reached the RH level, turn the dial clockwise until the indicator
turns amber.
1
The water container may be full, empty the container.
2
Ensure the water container is fitted. If you continue to have problems please see
'Requesting Service'.
3
Check
Reduced water extraction
Version 1
|
The humidistat (if activated) may be set too low, if signs of condensation or dampness
remain, increase the setting.
Version 2
|
If the indicator light is green the unit has reached the RH level, if signs of condensation
or dampness remain, turn the dial clockwise until the indicator turns amber.
1
The filter may be blocked. Remove, clean and refit.
2
3
4
Check
After being installed all dehumidifiers will collect less moisture as initial excess moisture is removed.
This is normal.
The dehumidifier may be positioned next to a heat source i.e. a radiator – reposition. If you continue
to have problems see 'Requesting Service'.
Red water container light remains on all the time and the dehumidifier is not running
(Normal when the water container is full).
Ensure the water container is not full.
1
Ensure the water container is fitted. If you continue to have problems see 'Requesting Service'.
2
Check
Check
