WARNING!
THIS PRODUCT CONTAINS R290 FLAMMABLE REFRIGERANT GAS.
READ THE SPECIFIC WARNINGS GIVEN IN THIS MANUAL.
9
Requesting service
Before requesting a service call please read the section 'If your Powerdri fails to operate
correctly' and follow any advice this offers. If after following this advice you still experience
problems please obtain the following information then either log on to www.ebac.com/faq
and use our quick and easy diagnostics system to resolve your problem or contact our customer
service desk on 0345 805 0000 (UK only)
1. Model and serial numbers (located on a rating plate behind the water container).
2. Your Name, Address, Postcode and Telephone Number.
3. Where your dehumidifier was purchased.
4. Date of purchase.
5. If applicable, any valid guarantee extension.
Technical and Safety information
Min Operating Temperature 3˚C
Max Operating Temperature 35˚C
Fuse Rating 13A
- Do not use the machine if the power cord or cabinet are damaged.
- If the machine is damaged or in need of repair please contact Ebac.
- Do not poke objects into any grilles on the machine.
- This machine complies with EMC/RFI directive EN60555 (BS800).
- Ebac has a policy of constant development and, therefore, reserves the right to change
specifications without prior notice.
- Do not use the machine without the permanent drainage bung in place on the back of the machine.
- Your dehumidifier should not be located in such a way that it will become an obstacle or hazard.
- Your dehumidifier should not be placed directly at the top of the stairs.
- To protect against electrical shocks, do not immerse unit, plug or cord in water, or spray with
liquids.
- Ebac would always recommend plugging the appliance directly into the mains where possible
however an extension lead may be used if required. The extension lead should be rated at the
correct current for the appliance, fuse protected and electrically safe. The extension must not
be overloaded. It is the responsibility of the user to ensure all of these conditions are met. Ebac
wouldn't accept any responsibility for malfunction due to the use of an extension.
- Ensure Power supply is RCD protected at 30mA.
- Do not put the unit close to heat-generating devices or near flammable and dangerous materials.
(e.g. electrical fires, fireplaces, etc.)
