CS60 OWNERS MANUAL
Drawing No. :- TPC302
Issue :-
1
Date :-
12/07/04
INTRODUCTION
Designed for a wide range of applications, the CS60 dehumidifier is a rugged, industrial unit
which utilizes an energy-efficient compressor and a compact portable design to provide easy
efficient drying.
The CS60 has a number of special features:
•
Compact Size
•
High efficiency rotary compressor
•
Ebac’s
“Hot Gas”
defrost system
•
Exterior epoxy powder-coated finish
•
Provision for permanent drainage
•
All galvanized interior
•
Extra long power cord
•
Humidistat
The fan draws the moist air through the cold evaporator coil, which cools the air below its dew
point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is
equipped with a permanent drain. The cooled air then passes through the hot condenser coil
where it is reheated using the same energy removed during the cooling phase, plus the additional
heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a
slightly higher temperature with a lower absolute humidity than that which entered. Continuous
circulation of air through the dehumidifier gradually reduces the relative humidity within the
area.
The CS60 dehumidifier is a rugged, reliable drying unit designed to operate effectively over a
broad range of temperature and humidity conditions. An active hot gas defrost system,
controlled by an electronic timer, guarantees positive de-icing, thereby optimizing operation at
low temperatures.
The unit incorporates a welded and galvanized steel chassis and is finished in an epoxy coating
for resilience to damage caused by rough handling.
