PAGE 1 OF 21
0621 IH-8554
H-8554, H-8555
DEHUMIDIFIERS
1-800-295-5510
uline.com
SAFETY
NOTE: Before installing and using dehumidifier,
read these instructions carefully. Store in a safe
place for future reference.
• Always place unit on a level surface.
• Never use or store gasoline or other flammable
vapor or liquid near unit.
• Maintain 12-18" clearance around unit.
Do not block or cover air inlet or outlet grilles.
• Unit must be connected to a correctly grounded
power supply.
• Do not start or stop unit by inserting or pulling out
power plug.
• Do not use an adapter plug or extension cord.
• Do not use near a bathtub, shower or swimming
pool.
• Do not insert anything into the air outlet. Do not
obstruct air inlet or outlet grilles.
• Do not let children play near unit.
• Always inspect cord for signs of damage before use.
If power cord is damaged, it must be replaced by
manufacturer or a qualified service technician.
• When cleaning, always turn unit off and unplug the
power cord.
• Recommended humidity levels:
Spring/Summer: 35% – 45%
Fall/Winter: 45% – 55%
• During normal operation, dehumidifier will exhaust
warm air from top of unit.
• Emptying the bucket depends on how many pints
of moisture the dehumidifier removes from the air.
The number of times the bucket will be emptied
depends on the unit's model number. Emptying
should be completed at full capacity.
• Using a dehumidifier will balance the humidity level
in the room, creating a more comfortable space.
Over time, this humidity level stabilizes, resulting in
less moisture accumulating in the air. As moisture
level decreases, dehumidifier will not need to
collect as much moisture as seen in previous
operation.
NOTE: Do not be concerned if the dehumidifier
is removing less moisture from the air or the
bucket is taking longer to fill. The dehumidifier
is working as intended and creating a more
stable humidity level.
NOTE: There may be a small amount of water
present in the bucket before using dehumidifier
for the first time. This is caused by preliminary
factory testing.
24-HOUR PERIOD
MODEL #
MOISTURE TO REMOVE
(DOE RATING)
TIMES TO EMPTY
H-8554
35 Pints
4
H-8555
50 Pints
3
Para Español, vea páginas 8-14.
Pour le français, consulter les pages 15-21.
