All capacitors are custom manufactured to the
highest standards. They exhibit exceptionally low loss,
extended frequency response, excellent surge capacity, and
very long life. The inductors are air core type, hand wound
in house, of unusually heavy wire for minimal loss and
exceptionally high power handling. Each component in the
crossover is matched to within 3% of the original design
values.
This crossover, the heart of the MS-100, is
unexcelled in quality and craftsmanship; indicative of the
attention to detail during the design and manufacturing of
this system. We have also provided front baffel level
controls for the mid and high frequencies which allow for
maximum flexibility in adjustment of the monitor for any of
the possible acoustic environments in which it might be
used.
The Cabinet and Grill
The cabinet which houses the MS-100 is
constructed of a special high-density material, vith walnut
veneers on both sides to prevent warpage and to reduce
resonances. This material, combined with a network of
internal bracing and acoustic damping materials, results in a
virtually resonance free enclosure. The front baffel is routed
out to allow the drivers to sit flush. Then, a specially
developed foam is placed on the baffel to eliminate
reradiated high frequency energy. The result is much
smoother response than otherwise attainable. The grill frame
is made
of rounded pieces which prevent reflections back onto the
baffel. As a finishing touch, the acoustically transparent
black grill complements the hand rubbed, oiled walnut
finish.
Our Philosophy
At EASTERN ACOUSTIC WORKS, we're proud
of the state of the art products which we've designed and
manufactured. Our attention to detail, combined with the
very best technical skills available, allow us to manufacture
products which set new industry standards, are reasonable in
price and which will last for a long time, even under the
most demanding conditions. Innovations which are useful
Nominal response
32 Hz to 22,000 Hz
±
3dB
Polar response
-3dB
-6dB
300
12 K Hz
17 K Hz
600
8 K Hz
10 K Hz
Sensitivity
91 dB for 1 watt at 1 meter
Power Handling
75 watts RMS
Sine wave
Program
150 watts
Nominal impedance
8 ohms
Crossover frequencies
450 Hz and 3000 Hz
Driver specifications
HF driver
MF driver
LF driver
Nominal diameter
250mm (10"), 1 14mm (41/2"),26mm (1
Type
Polymeric Cone,Polymeric Cone,Soft Dome
Enclosure type
Vented/ABR
Enclosure Volume
70 Litres
Dimensions:
20"w x 31"h x 10"d
