Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
25
AC6
User Manual
6. Cable the unit and set desired angle
a. Using pre-wired cabling, wire the AC6 unit in
both upper and lower locations.
b. If WP covers are being used, install the
covers at this stage.
c. If additional cabinets are being mounted,
repeat steps 5 and 6 until all units within an
array are mounted.
d. Rotate each cabinet in the array to the
desired angle.
e. Fully tighten hinge hardware and the pan
lock to secure the cabinet in place. Do not
overtighten.
f. Mount the cosmetic cover (optional). Using
the included M6x20 screws, attach the cover to
the wall bracket to hide the hinge mechanism.
Do not overtighten.
Panned wall bracket
Flush Mount Bracket Instructions
Tools needed: 10mm wrench or hex driver, 4mm allen
Item Description
Quantity
A
AC6 Wall Bracket
1
B
AC6 Cabinet Bracket Assembly
1
C
Cosmetic Cover
1
D
M6 x 20 screws
2
2. AC6 wall bracket limits of use
a. The AC6 flush mount bracket is designed to suspend each corresponding AC6 Series loudspeaker
with a design factor of 10:1 to meet or exceed most global suspension regulations. Below are the
maximum working load limits at 10:1, 7:1 and 5:1 Design Factors.
1. Inventory
Before beginning installation, inventory your available hardware to items listed.
