manualshive.com logo in svg

EAW AC6, Руководство пользователя

Поделиться
Скачать
EAW AC6 Скачать руководство пользователя страница 20

Tel 800 992 5013 / +1 508 234 6158  

|

  www.eaw.com

20

AC6 

User Manual

Mounting & Rigging AC6

IMPORTANT SAFETY INSTRUCTIONS – READ THIS FIRST

Safety Instructions

Read and heed all warnings and safety 

instructions in this manual before using this 

product. Failure to follow these precautions 

may result in damage, injury, or death.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Clean only with a dry cloth.

6) Install loudspeaker in accordance with the 

manufacturer's instructions.

7) Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 

apparatus that produce heat.

8) Only use attachments/accessories specified 

by the manufacturer.

9) Refer all servicing to qualified service 

personnel. Servicing is required when the 

apparatus has been damaged in any way, does 

not operate normally, or has been dropped.

10) Use personal protective equipment 

not limited to gloves, safety goggles, ear 

protection, and lifting supports.

System Requirements

EAW Resolution 2 requires an IBM®-compatible PC with Windows 10® operating systems, 

including a standard Ethernet port to connect the computer to the network and control NTX 

& SBX loudspeaker modules. Though processor speed and memory size primarily impact only 

calculation time, the following specifications are recommended for useful operation:

MINIMUM REQUIREMENTS RECOMMENDED SPECIFICATIONS

Processor

2.2 GHz Dual Core Processor 2.8 GHz Quad Core Processor

Memory

2 GB RAM

8 GB RAM

Screen Resolution

1024 x 768 display resolution 1920 x 1080 display resolution

Operating System

Windows 10

Windows 10

Storage

1 GB available HD space

1 GB available HD space

**Currently, Resolution does not support 4k screens or Windows 11**

Содержание AC6



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды