Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
24
AC6
User Manual
5. Installation of AC6 to wall bracket
a. Before mounting the AC6, wires should be
run to the intended locations. Consider the
orientation of mounting, power will either
come from the top down, or the bottom up.
b. Network, analog audio, and dry contacts
can be looped from either end. Refer to user
manual for more information.
c. Starting from the bottom of the array and
moving to the top, mount each AC6 to the
respective wall bracket.
d. The button head screws (M6x35) on the
cabinet bracket are loose, it will be tightened
once the cabinet is mounted to the wall
bracket. Have a 4mm allen driver available to
tighten immediately.
The cabinet should not
be left unattended if this hardware has not
been tightened
.
Attaching AC6 to wall bracket
e. Lift the cabinet up to the mounting bracket
and slide the button head screw shafts into
the notches in the wall bracket. Slide the
cabinet back so the hardware sits fully into the
notches.
f. Using 4mm allen, tighten the button head
screws so the cabinet cannot be removed from
the mount.
g. Unscrew the button head (M6x20) screw
from the pan locking arm and loosely attach
the pan locking to the wall bracket.
Detail: button head hardware positioning
