Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
15
AC6
User Manual
Testing specific drivers or channels
Once the test has started, it’s possible to
navigate to a specific driver using the DSP
wheel
1. Rotate the DSP Navigation / Edit
Wheel to select Start.
2. Press the DSP Navigation / Edit
Wheel to initiate the automatic test
procedure.
3. Use DSP Wheel either clockwise or
counter clockwise to locate specific
driver or channel.
Settings
From the Settings menu, it’s possible to
restore the loudspeaker to factory default
settings, and view network address and
firmware version information.
Restore
:
Factory or network settings can quickly
and easily be restored. This is convenient
for managing rental inventories or for
resetting a mobile production system prior
to deployment to the next venue or job site.
It can also be used when troubleshooting
loudspeakers exhibiting distorted audio,
poor frequency response, low output, etc.
Certain settings in the loudspeaker can
only be accessed via EAW Resolution. These
settings can be the cause of what may appear
to be poor performance when the speaker is
isolated on the test bench, or when compared
to other units in inventory. All settings are
reset to factory default when the Restore
procedure is performed.
4. Rotate the DSP Navigation / Edit Wheel
to select
Defaults
or
IP Addresses
.
5. Select No to prompt to return to the
Settings sub-menu without changing any
of the loudspeaker settings.
6. Select Yes to prompt to restore factory
or network default settings and return to
the Main Menu.
