Eaton ZB-S Series, Руководство по установке

Страница: 8 / 20

8
14 Installation of ZB-S 26, 18, 18C6, 10C, 10C6 in the EBR-S-2050 electrical service room
Manual: ZB-S central battery system in electrical service rooms EBR-S 40071860238 (C) November 2017 www.ceag.de
15 Technical data
Type ZB-S/26 ZB-S/18 ZB-S/LAD Battery cabinet ZB-S/10C ZB-C/26C6 ZB-S/18C6 ZB-S/10C6 ZB-S/18C3 ZB-S/10C3 ZB-S/2C3 CG 200 CG 100
Electrical service room including cable barrier
and ventilation barrier.
EBR-S-2050 EBR-S-2050 EBR-S-2050 EBR-S-2050 EBR-S-2050
Project-specific planning on-site is necessary with oversize.
EBR-S-2050 EBR-S-2050 EBR-S-1800 EBR-S-1800 EBR-S-1800 EBR-S-1800 EBR-S-1800
CEAG part number 40036071113 40036071113 40036071113 40036071113 40036071113 40036071113 40036071113 40036071111 40036071111 40036071111 40036071111 40036071111
Electrical service room including cable barrier
and ventilation barrier. Self-assembly
EBR-S-2050 EBR-S-2050 EBR-S-2050 EBR-S-2050 EBR-S-2050 EBR-S-2050 EBR-S-2050 EBR-S-1800 EBR-S-1800 EBR-S-1800 EBR-S-1800 EBR-S-1800
CEAG part number 40036071112 40036071112 40036071112 40036071112 40036071112 40036071112 40036071112 40036071110 40036071110 40036071110 40036071110 40036071110
Installation of the system in an assembled
room is possible at a later date
no no no no no no no yes yes yes yes yes
Max. airflow [m³/h] acc to. EN50272-2
for boost charge*
3.86 2.32 3.86 3.86 1.01 1.01 0.60 0.51 0.22
Max. heat loss rate [W]* 800 700 600 13 300 400 350 250 200 150 200 80
No. of KRS 125 cable sealings for 26 cables
3 x 2.5 mm² or 10 cables at 3 x 25/16 mm²
4 4 4 4 4 4 4 2 2 2 2 2
Max. no. of 2.5 mm² cables 78 78 8 - 78 78 78 26 26 26 26 26
Max. no. of 25 mm² cables 10 10 10 2 10 10 10 10 10 10 10 10
Dimensions
[H without stand/H with standxWxD; mm]
2417/2501x1144x736 2417/2501x1144x736 2417/2501x1144x736 2417/2501x1144x736 2417/2501x1144x736 2417/2501x1144x736 2417/2501x1144x736 2262/2346x894x586 2262/2346x894x586 2262/2346x894x586 2262/2346x894x586 2262/2346x894x586
Weight (approx.) room/system [kg] 692/180 692/170 692/170 692/170** 692/155 692/205 692/200 459/120 459/115 459/50 459/110 459/35
Accessories
Maximum number of supplementary KRS 125
cable sealings. Max. 26 cables per cable sealing
3 x 2.5 mm² or 10 cables at 3 x 25/16 mm²
(see figure on page 5)
6 6 6 6 6 6 6 4 4 4 4 4
Plinth with plinth panel, width 1060 mm,
H = 84 mm
EBR-S-2050-SO EBR-S-2050-SO EBR-S-2050-SO EBR-S-2050-SO EBR-S-2050-SO EBR-S-2050-SO EBR-S-2050-SO - - - - -
CEAG part number 40036071115 40036071115 40036071115 40036071115 40036071115 40036071115 40036071115 - - - - -
Plinth with plinth panel, width 810 mm
H = 84 mm
- - - - - - - EBR-S-1800-SO EBR-S-1800-SO EBR-S-1800-SO EBR-S-1800-SO EBR-S-1800-SO
CEAG part number - - - - - - - 40036071114 40036071114 40036071114 40036071114 40036071114
Stop rail, cable infeed incl. fixing material 40071361160 40071361160 40071361160 - 40071361160 40071361161 40071361161 - - - - -
Mounting plinth for wall cabinets - - - - - - - - - 40071360410 - 40071360410
Door stop, left No additional costs but 6 weeks of delivery time. No additional costs but 6 weeks of delivery time.
O
* Ventilation for the battery charge
and
heat dissipation must be provided. ** Without batteries
14 Installation of ZB-S 26, 18, 18C6, 10C, 10C6
in the EBR-S-2050 electrical service room
1. Align the system and screw-fasten to the rear wall of
the room.
CAUTION
Holes must be pre-drilled for fastening screws into the
fire protection material. Drill hole depth: max. 25 mm,
screw length: max. 25 mm.
2. Set up the technical ventilation (see the installation and
operating instructions ELECTRICAL SERVICE ROOM
PRIORACK-Elt EBR)
3. Disassemble the roof plate of the ZB-S. Mount the
cable interception system (see the drawing).
4. Feed in the cables.
5. Connect the system in accordance with the CEAG ZB-S
instructions and carry out commissioning of the system.
ZB-S 26 and ZB-S 18 in
EBR-S-2050
ZB-S 18C6 and ZB-S 10C, 10C6
in EBR-S-2050