EATON xChargeIn UDP Programmers Guide V 2.01
EATON xChargeIn, UDP Programmers Guide V 2.01
8
© EATON 2018
Whitelist
Operating status
State
Plug
AuthON
Authreq
Empty
idle
1
3
0
0
Empty
plugged but not charging
2
7
0
0
Empty
charging
3
7
0
0
Not empty
idle and locked
1
3
1
1
Not empty
unlocked and not charging
1
3
1
0
Not empty
unlocked and plugged but not
charging
2
7
1
0
Not empty
unlocked and charging
3
7
1
0
The following can be concluded for all device types listed as xChargeIn S-
series: If the field “AuthON” is set to “0”, then the authorization function is
disabled.
2.4.2
xChargeIn M-series
xChargeIn M-series features a web interface with a dedicated setting for the
authorization function. This function is governed by an additional circuit
board called “COM-module” which also houses the WiFi components. The
RFID authorization can be deactivated even though the whitelist of the
charging station is not empty.
xChargeIn M-series will behave like xChargeIn S-series after a restart until
the COM-module is ready (~ 5 min after restart). The data shown in the
following table can be acquired using the command
report 2
.
Whitelist
Operating status
State
Plug
AuthON
Authreq
Empty
idle
1
3
0
0
Empty
plugged but not charging
2
7
0
0
Empty
charging
3
7
0
0
Empty
idle and locked (cannot be un-
locked since whitelist is empty)
1
3
1
1
Not empty
idle
1
3
0
0
Not empty
plugged but not charging
2
7
0
0
Not empty
charging
3
7
0
0
Not empty
idle and locked
1
3
1
1
Not empty
unlocked and not plugged
1
3
1
0
Not empty
unlocked and plugged but not
charging
2
7
1
0
Not empty
unlocked and charging
3
7
1
0
The following can be concluded for all device types listed as xChargeIn M-
series: If the field “AuthON” is set to “0”, then the authorization function is
disabled.
