Publication Number AD05006002E
Page 15
With this information, the ELC-PV controller program can be written to control
and monitor these SmartWire-DT devices via Modbus TCP Ethernet.
Using SmartWire-DT on EtherNet/IP via the EU5C-SWD-EIP-
MODTCP Gateway and a Rockwell CompactLogix L23E
controller
Any EtherNet/IP master may be used to monitor and control a SmartWire-DT
system with the EU5C-SWD-EIP-MODTCP Ethernet gateway. The SmartWire-
DT gateway is a slave on EtherNet/IP and a master on the SmartWire-DT
network. The data for each SmartWire-DT device connected to the gateway is
mapped to the Input and Output images in the gateway. This is what the
EtherNet/IP master reads and writes from/to the gateway.
After setting up the SmartWire-DT system per one of the two methods described
earlier in this application example, the SmartWire-DT system should look like the
following in the SWD-Assist software:
