Publication Number AD05006002E
Page 13
The computer must be configured with an IP Address and Subnet Mask to
communicate with the ELC-COENETM module. Or, use the RS232 ELC
programming cable (part number ELC-CBPCELC3) to access the module via the
round mini-din RS232 port. Under the Tools drop down menu, select
Communication Setting to choose Ethernet or RS232 to go online to configure
the Ethernet master module. Then click the “M” icon on the tool bar indicated by
the arrow in the screen shot above and the software will find the ELC-COENETM
module. Double click the module’s icon to display its Property Pages shown
below.
Modify the Ethernet parameters for the Ethernet master from the Basic tab. Then
select the Data Exchange tab to set up polling for the SmartWire-DT gateway at
IP Address 192.168.1.3. The following shows the poll messages set up in the
ELC-COENETM module. The Modbus Data addresses must be entered in
Hexadecimal.
