![background image](http://html1.mh-extra.com/html/eaton/sc300/sc300_operation-handbook_4128896019.webp)
SC300 Operation
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-03 B2 Issue B2 July 2018
13
Changing a Configuration Setting using the Keypad
For the configuration settings that can be changed using the keypad, the keys have the following
functions.
Press to change the setting or activate a control process.
Press to change the value. Hold key to change at a faster rate.
Use these keys for values with multiple segments (for example an IP address).
Press to save the new value.
Or
Press to leave the value unchanged.
Keypad Access Security
This feature prevents accidental or unauthorized changes to settings from the SC300 keypad.
All access to change an SC300's settings will be lost if:
•
All communications are disabled (see S3P Access on page 116 and HTTP/HTTPS
Access on page 117), and
•
Keypad access is
Read Only
, or
PIN Protected
and the keypad access PIN is lost.
The SC300 will continue to function, but no configuration changes can be made.
Contact your Eaton dc product supplier or Eaton for advice (see Worldwide Support
on page
► To use Web / DCTools to enable/disable keypad access
•
In Web go to
System > Interfaces
>
Front Panel
.
•
In DCTools, go to
Configuration > Communications > Front Panel.
•
Set
Access
to:
•
Unprotected
- keypad access is allowed to view and change parameters, or
•
Read Only
- keypad access is allowed to view parameters only, or
•
PIN Protected
- keypad access is allowed to view and change parameters if the
correct 4-digit number is typed in the
Access PIN
field. Otherwise,
Read Only
access is allowed.
► To use the SC300 when access is set to PIN Protected
•
At the Main Screen press
Menu
. The
Logon
screen appears.
•
If the
Access PIN
is not known then press
Skip
to use the SC300 with
Read Only
access.
•
If the
Access PIN
is known:
•
Use the Left and Right keys to access each digit position. Use the Up and Down
keys to change the digits.
•
When the correct digits are entered, press
Logon
.
Keypad access will return to PIN Protected mode when the display returns to the Main Screen.