manualshive.com logo in svg

Eaton RTK 725B range, Инструкция по эксплуатации

Поделиться
Скачать
Eaton RTK 725B range Скачать руководство пользователя страница 31

INM 725B Rev 21

25

2 .10  AS Cell - Differential Input Version

Cell type 

AS

 is used to provide:-

 

•  Four Isolated digital inputs for use with volt-free or powered contacts 

 

•  Universal Input Power Supply capable of accepting either:-

 

•  AC voltages in the range 85-264VAC or 

 

•  DC voltages in the range 88-300VDC

 

•  The Power Supply card is located in the upper card slot as typically shown above.

 

•  The power supply is suitable for use with a number of cells which varies depending 

 

 

on the window size used and the options fitted.

 

•  Multiple power supply cards can be used in larger annunciators.

 

•  The drawing above indicates the standard card types available for cell type AS

  •  Fuse FU-2A-05, (5 x 20 mm), 2A-T Fuse is used to protect the primary supply for 
 

 

voltages less than or equal to 150V AC/DC.

 

•  Fuse FU-0.5A-05, (5 x 20mm) 0.5A-T Fuse is used to protect the primary supply for 

 

 

voltages greater than 150V AC/DC

WARNING !

The unit is fitted with a 0.5A primary input fuse as standard. This fuse should 

only be changed for lower supply voltages in accordance with the details 

above.

Содержание RTK 725B range

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды