Eaton PowerXL DX-NET-DEVICENET, Руководство пользователя

Страница: 53 / 62

4 Commissioning
4.8 Parameter
DX-NET-DEVICENET 02/14 MN04012005ZEN www.eaton.com
49
95 P3-10 PID controller, actual value (PV) rw 310 A2
96 P3-11 Maximum PID error for enabling the ramps rw 311 A2
97 P3-12 PID feedback display scaling factor rw 312 A2
98 P3-13 PID feedback wake up level rw 313 A2
99 P3-14 Reserved - 314 A2
100 P3-15 Reserved - 315 A2
101 P3-16 Reserved - 316 A2
102 P3-17 Reserved - 317 A2
103 P3-18 PID reset control rw 318 A2
106 P4-01 Motor control mode selection rw 401 A2
107 P4-02 Auto-tune enable rw 402 A2
108 P4-03 Rotational speed controller P gain rw 403 A2
109 P4-04 Speed controller integral time rw 404 A2
110 P4-05 Motor Power Factor (cos ϕ ) rw 405 A2
111 P4-06 Torque setpoint/limit rw 406 A2
112 P4-07 Maximum torque (motor) rw 407 A2
113 P4-08 Minimum torque rw 408 A2
114 P4-09 Maximum torque (generator) rw 409 A2
115 P4-10 V/Hz characteristic curve modification voltage rw 410 A2
116 P4-11 V/Hz characteristic curve modification frequency rw 411 A2
126 P5-01 Inverter Slave Adress rw 501 A2
127 P5-02 CANopen Baud rate rw 502 A2
128 P5-03 Modbus RTU Baud rate rw 503 A2
129 P5-04 Modbus RTU data format – Parity type rw 504 A2
130 P5-05 Timeout at communications dropout rw 505 A2
131 P5-06 Response in the event of a communications dropout rw 506 A2
132 P5-07 Ramp via field bus rw 507 A2
133 P5-08 Field bus module PDO-4 output rw 508 A2
134 P5-09 reserved - 509 A2
135 P5-10 reserved - 510 A2
136 P5-11 reserved - 511 A2
137 P5-12 Field bus module, PDO-3 output rw 512 A2
138 P5-13 Field bus module, PDI-4 input rw 513 A2
139 P5-14 Field bus module, PDI-3 input rw 514 A2
146 P6-01 Firmware upgrade enable rw 601 A2
147 P6-02 Auto temperature management rw 602 A2
148 P6-03 Auto-reset waiting time rw 603 A2
149 P6-04 Relay hysteresis band rw 604 A2
ADI - order Description Access right ADI instance
number ADI object
class