INSTALLATION
Eaton 5115 Rack-Mount UPS (500–1500 VA) User's Guide
S
164201449 Rev B
www.eaton.com/powerquality
27
5.
Select the proper holes in the rail for positioning the UPS in the
desired location in the rack.
6.
Using two M6
10 screws and two clip nuts, attach the rail to the
rear of the rack (see Figure 8).
Clip Nuts
M6
10
Rear Rail Screws
Figure 8. Securing the Rear Rail
7.
Secure the bottom hole of the rail to the front of the rack with one
M6
10 screw and clip nut (see Figure 9).
8.
Install a clip nut in the top hole of the rail.
9.
Repeat Steps 6 through 8 for the other rail.
10.
Tighten the assembly wing nuts on both rail assemblies.
Assembly Wing Nuts
Clip Nuts
M6
10
Front Rail Screw
Figure 9. Securing the Front Rail