Power Xpert
9395P Field Installed UPM Mechanical Installation Manual
S
P-164000503 Rev 1
1-1
Chapter 1
Introduction
The Power Xpert
®
9395P Field Installed UPM (FI-UPM) provides increased capacity or
N+1 redundancy for Power Xpert 9395P UPS systems. Capacity increase depends on
the capabilities of the originally installed system. The FI-UPM may be installed at any
time when power needs change. The module cabinet installs on the left side of the
UPS cabinet and wires directly to the UPS. No input or output wiring changes are
needed for a capacity increase if the original installation was wired with increased
capacity in mind. Operation remains the same as the original UPS.
The FI-UPM is housed in a single, free‐standing cabinet with safety shields behind the
front panel for hazardous voltage protection. The cabinet matches the UPS cabinet in
style and color. Figure 1‐1 shows the Power Xpert 9395P FI-UPM.
NOTE
Wiring, startup, and operational checks must be performed by an authorized Eaton Customer Service
Engineer, or the warranty terms specified on page W-1 become void. This service is offered as part of the
sales contract for the FI-UPM. Contact an Eaton service representative in advance (usually a two-week notice
is required) to request service.
1.1
Using This Manual
This manual describes how to mechanically install the Power Xpert 9395P FI-UPM
cabinet. Electrical installation will be performed by an Eaton Customer Service
Engineer. Read and understand the procedures described in this manual to ensure
trouble-free installation.
1.2
Conventions Used in This Manual
This manual uses these type conventions:
S
Bold type
highlights important concepts in discussions, key terms in procedures,
and menu options, or represents a command or option that you type or enter at a
prompt.
S
Italic type
highlights notes and new terms where they are defined.
S
Screen type
represents information that appears on the screen or LCD.
Icon
Description
Information notes call attention to important features or instructions.
[Keys]
Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].
In this manual, the term
UPS
refers only to the UPS cabinet and its internal elements.
The term
UPS system
refers to the entire power protection system – the UPS
cabinet, the battery cabinet, and options or accessories installed.
Figure
