Eaton PDI WaveStar Infinity 2, Руководство по установке и эксплуатации

Страница: 13 / 78

Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01 3
C Chhaapptteerr 22 IInnttrroodduuccttiioonn
The Eaton PDI Infinity 2 Monitoring Systems are high-performance monitoring systems for Eaton power
distribution equipment and are customized for the underlying equipment configuration according to customer
requirements.
Infinity 2 consists of these elements:
• Infinity 2 Monitor, an information display/monitor with many monitoring screens
– 7” Color Touchscreen display on monitored unit
– Remote browser access to same screens as the local display
• Customized set of Sensor Boards (PCBs) configured according to customer monitoring requirements.
Sensors may include monitoring for these power distribution components:
– Transformers
– Subfeeds (voltage and/or current)
– Panelboards (North American 42- or 84-pole)
– Digital inputs
• Sensor boards may also have other connections, such as Emergency Power Off (EPO), Remote EPO
(REPO), or output relays.
• Internal Ethernet Sensor Board network, providing fast collection of sensor data
• Upstream Ethernet and Modbus RTU connectivity, allowing Infinity 2 to interface to various customer
management systems
• Single consolidated Modbus Points list and SNMP Management Information Block (MIB) matching your
customized configuration
Infinity 2 Monitoring Systems are integrated into Eaton PDUs or RPPs during manufacturing.
This manual describes how to:
• Make customer network connections to Infinity 2 ( Chapter 3 Customer Network Connections ).
• Make local customer connections to sensor boards for REPO, building alarms, and relays (
Chapter 4 Customer Sensor Board Connections ).
• Associate your Modbus points list and SNMP MIB to your physical sensor configuration (Paragraph
4.4 Modbus Points List and SNMP MIB ).
• Use your Infinity 2 system to monitor your power distribution equipment ( Chapter 5 Setup and
Chapter 6 Operation: Monitoring Your System ).
• Make physical adjustments to your Infinity 2 system through circuit calibration and panelboard CT
replacement (
Chapter 7 Maintenance ).
NOTE The term PDI in this manual refers to products previous manufactured by Power
Distribution, Inc. All service and support for these features are now supplied by Eaton.
22..11 G Geettttiinngg H Heellpp
If help is needed with any of the following:
• Scheduling initial startup
• Regional locations and telephone numbers