Eaton PDI WaveStar Infinity 2, Руководство по установке и эксплуатации

Страница: 71 / 78

Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01 61
C Chhaapptteerr 77 M Maaiinntteennaannccee
Calibrating circuit measurements or replacing a panelboard CT can expose you to live voltages.
Exercise caution and wear personal protective equipment (PPE).
77..11 C Caalliibbrraattiioonn
The measurement of any input voltage, input current, or current for an individual panel board circuit can be
calibrated. To use calibration screens, the user must be logged in.
Table 4. Calibration Procedure with Calibrate Screen
Calibration Step Screen or Illustration
1. Display Home screen.
2. Log in.
3. Select icon to bring up the Calibrate screen.
4. Select circuit group you wish to calibrate on
Sensor Board drop-down list.
4
6
5. Measure circuit value.
6.
Enter correct measurement in ‘Calibrate to:’
field.
7.
On panel boards, you can scroll the circuit
display using
NEXT or PREVIOUS button.