Eaton Network-M2 Скачать руководство пользователя страница 137

Страница: 137 / 268

Maintenance

Contextual help of the web interface – 137

•
•
•
•
•

3.8.2.1.1 Firmware information

a Status

Uploading
Invalid
Valid
Pending reboot
Active

b Version/Sha

Displays the associated firmware version and associated Sha.

c Generated on

Displays the release date of the firmware.

For better performance, security, and optimized features, Eaton recommends to upgrade the Network Module regularly.

d Installation on

Displays when the firmware was installed in the Network Module.

e Activated on

Displays when the firmware was activated in the Network Module.

3.8.2.2 Upgrade the Network Module firmware

During the upgrade process, the Network Module does not monitor the Device status.

To upgrade the firmware:

1. Download the latest firmware version from the website. For more information, see the

Servicing the Network Management

Module>>>Accessing to the latest Network Module firmware/driver

section.

2. Click +Upload.

3. Click Choose file and select the firmware package by navigating to the folder where you saved the downloaded firmware.

4. Click Upload. The upload can take up to 5 minutes.

The firmware that was inactive will be erased by this operation.

When an upgrade is in progress, the upload button is disabled, and the progress elements appear below the table with the
following steps:

Transferring > Verifying package > Flashing > Configuring system > Rebooting

A confirmation message displays when the firmware upload is successful, and the Network Module automatically restarts.

Содержание Network-M2













































































































































































































































































Результаты поиска

Содержание Network-M2

Отзывы:

Похожие инструкции для Network-M2

Бренды по названию

Популярные бренды

Eaton Network-M2, Руководство пользователя

Результаты поиска

Содержание Network-M2

Отзывы:

Похожие инструкции для Network-M2

Бренды по названию

Популярные бренды